Blog
108 articlesUnbend Tool improvements
Published : 04/20/2019 03:49:55The following new improvements have been implemented in the Unbend tool: 1. Progress Indicator. 2. The ability to interrupt by pressing "esc". 3. Greater accuracy in the "Unbend".
Flange Sheet improvement
Published : 04/20/2019 03:49:20New "Flange" properties have also been added. They are disabled in Selection info palette for older (TC2018 and earlier) Part Tree nodes but available for new Part Tree in TurboCAD 2019.
Extrude Improvement - Surface extrude for flat 3D polylines or 3D curves.
Published : 04/20/2019 03:43:34Users can now select flat 3D polylines or 3D curves for Surface Extrude tools such as Revolve. Also, 3D Curve and Curve (2D Curve) are now separate tools.
Fillet Edges (blend) tool improvements.
Published : 04/20/2019 03:40:42Three Blend Types added: 1. Curvature continuous blending. 2. Fixed width blend 3. Three-face blends
ACIS® Faceter - Surface Tolerance
Published : 04/20/2019 03:26:52The Surface Tolerance represents the maximum distance between a facet and the true surface definition.
Pick Point Hatch Improvement.
Published : 04/20/2019 03:24:58This Hatching tool now works with gaps in 2D objects.
Construct Similar
Published : 04/20/2019 03:22:50The “Construct Similar” tool takes properties from one object and applies them onto active tool.
Angular dimension tool improvement.
Published : 04/20/2019 03:21:13The Angular Dimension tool has been improved with a Local Menu option that is enabled when the Angular Dimension tool is selected.
Remove Overlapping Entities Tool
Published : 04/20/2019 03:20:08This new ‘overkill’ tool allows the user to eliminate overlapping lines and arcs, thereby allowing for the simplification of drawings by removing duplicate, redundant entities.
Trace Tools - Trace By Point and Trace By Rectangle incorporated to 64-bit
Published : 04/20/2019 03:18:38Trace tools (Trace by Point and Trace by Rectangle) are now supported in the 64-bit of TurboCAD, not just the 32-bit version.